-
by leealex
Real-Time Messaging Protocol (RTMP) was initially a proprietary protocol developed by Macromedia for streaming audio, video and data over the Inter...
-
by leealex
This article will cover bringing the RTSP feed of the camera into some commonly used Video Mixing software (OBS, vMix, and Wirecast).
Please Note...
-
by leealex
How do I set up my SMTAV camera to be “on my network”?
The first thing you are going to want to do to get your camera up and streaming on your n...
-
by leealex
The following three pictures are the Gooseneck microphone, the camera BA30S, and their connection diagrams.
After the line in port of the camera i...
-
by leealex
-
by leealex
1. The first thing you are going to want to do to get your camera up and streaming on your network is to connect your camera to power, an active ne...
-
by leealex
Camera Maintenance
If the camera will not be used for a long time, please turn off the power switch.
Use a soft cloth or lotion-free tissue to cle...
-
by leealex
If you want to build a live broadcast system, SMTAV is undoubtedly the best choice. We provide you with professional high-performance, low-cost aud...
-
by leealex
1 Setup IP Controlled by Dynamic DNS
Two dynamic DNS: Dyndns.org, 3322.org.
Router Port Mapping:
Take Tenda router for example, enter the Router...
-
by leealex
Key Description
1. Standby Key
Press this button to enter standby mode. Press it again to enter normal mode. Note: Power consumption i...
-
by leealex
The follow steps will be very similar in video production software such as vMix, Wirecast or xSplit.
Open OBS and add a Scene. In the scene we can...
-
by leealex
When you are first getting setup it is helpful to connect your camera to an HDMI monitor, but you can also use the SDI output to view video from yo...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device